Microchip Technology PIC32CM GC 32-Bit Arm® Cortex®-M23 MCUs
Microchip Technology PIC32CM GC 32-Bit Arm® Cortex®-M23 Microcontrollers (MCUs) are a family of low-power 32-bit Arm-based MCUs that offer safety, CAN-FD, SERCOMs (USART, SPI, I2C, LIN, etc.), full-speed USB, enhanced touch, and advanced analog features. The Arm Cortex-M23 CPU can run up to 72MHz and has a 2.64 CoreMark/MHz and 1.03 DMIPS/MHz rating. The Microchip Technology PIC32CM GC advanced analog features include a 12-bit Analog-to-Digital Converter (ADC) module with up to 4.5Msps, up to 12 single-ended channels, or three differential and six single-ended channels. The enhanced peripheral touch controller features up to 324 (18 x 18) mutual-capacitance channels and up to 36 self-capacitance channels, with Driven Shield+ technology. These devices are available in TQFP-48, VQFN-48, TQFP-64, VQFN-64, or TQFP-100 packages.
Features
- Processor
- Arm Cortex-M23
- 72MHz (1.03 DMIPS/MHz)
- Memory Protection Unit (MPU)
- 1.71V to 3.66V operating voltage range
- Memory
- 512KB Flash with ECC/fault injection
- 128KB SRAM with ECC/fault injection
- 512bytes TrustRAM
- System
- Nested Vector Interrupt Controller (NVIC)
- 8-channel DMA controller
- 12-channel event system
- Functional safety
- ISO 26262:2018 compliant
- ASIL-B safety level
- ECC with fault injection on both Flash and SRAM
- Programmable 32-bit Cyclic Redundancy Check (CRC) with DMA
- SRAM/TrustRAM MBIST is accessible in boot user mode accessible
- Fail-Safe Clock Monitor (CFD)
- Communications peripherals
- Two CAN-FD modules (ISO 11898-1:2015)
- One Full-Speed (12Mbps) Universal Serial Bus (USB) 2.0 interface
- Six SERCOM modules (SPI, USART, I2C, LIN, etc.)
- Analog peripherals
- 12-bit ADC up to 5.14Msps and up to 12 channels
- Two analog comparators
- Peripheral Touch Controller (PTC)
- Timer/counters
- Up to seven 16-bit timers/counters for control (TCC)
- 32-bit Real-Time Counter (RTC)
- Watchdog Timer (WDT) with window mode
- I/O
- 80 GPIOs
- 16 external interrupts
- PTC self/mutual channels: 36/18x18
Applications
- Automotive body and comfort electronics
- Automotive gateways and sensor nodes
- Industrial control and automation
- Industrial Human–Machine Interfaces (HMI)
- Consumer appliances
- Smart home and building automation
- USB‑enabled embedded devices
- Secure and safety‑critical embedded systems
- General‑purpose embedded control
Block Diagram
Packages
