BittWare RFX-880 RFSoC Ethernet Card
BittWare RFX-880 RFSoC Ethernet Cards are digital direct sampling transceivers featuring the third-generation AMD Zynq® UltraScale+™ RFSoC. This versatile solution uses the RFSoC for direct sampling between 50MHz and 6GHz. Card implementation optionally integrates filters and amplification, displacing external devices. The BittWare RFX-880 series is designed as a standalone card in a PCIe form factor. Installing the card in a ruggedized chassis allows users to mount the RFX-880 card near the antenna to transform antenna data into packets. The RFX-880 cards get all their power from the external power connector and can be connected via an onboard RJ45 connector, eliminating the need for a PCIe slot. The cards also work in traditional PCIe slots on servers.
The AMD Zynq UltraScale+ RFSoC integrates RF-class A/D and D/A converters into the Zynq FPGA fabric and multi-core Arm® processor subsystem, creating a multi-channel data conversion/processing solution on a single chip. With 400Gbps of digital I/O available on the FPGA side of the RFSoC, the cards support four times the bandwidth of RFSoC implementations that rely on PCIe for data transfer. The I/O is available through two QSFP-DD ports. Users can implement transports using Aurora, Ethernet MAC frames, and UDP.
Features
- Integrated amplification and filtering
- Higher performance and cost-effective
- 400Gbps digital I/O via QSFP-DDs ideal for high-bandwidth RFSoC implementations
- Third-generation AMD Zynq UltraScale+ RFSoC for direct sampling between 50MHz and 6GHz
- PCIe form factor for use as standalone, installed in ruggedized chassis, or mounted in traditional PCIe slot
Applications
- Satellite communications (SatCom)
- Radar systems
- Military
- Wireless communication
- Test and measurement
Specifications
- AMD Zynq UltraScale+ RFSoC
- XCZU43 in a G1517 package
- Core speed grade -2
- Analog
- 4x 5GSPS 14-bit ADCs
- Wideband build option provides +0dB to -27dB gain from 50MHz to 6GHz with no filtration
- 1st Nyquist (L-Band) build option provides +44dB to -29dB on all 4 channels, constrained between 400MHz and 2.5GHz by filters FL1 and FL2
- 2nd and 3rd Nyquist filters also available on amplified channels as special order
- 4x 9.7GSPS 14-bit DACs
- Range of about +3dBm to -24dBm
- High power end of this range is a function of frequency
- Constrained by a 4.8GHz LPF
- Programmable clocks
- External reference and triggers
- Push-on SMPM connectors with optional SMA pigtails
- 4x 5GSPS 14-bit ADCs
- Onboard flash
- PS connects to a pair of 2Gb QSPI parts configured in dual-parallel mode; PS boots from QSPI to configure itself, then pulls logic bitstream from QSPI and configures PL
- 32GB eMMC for Arm disk
- External memory
- 16GB, 64-bit DDR4-2400 processing system with ECC
- 32GB, 2x banks 64-bit DDR4-2666 programmable logic with ECC
- External digital interfaces
- Processing system
- 4x PCIe Gen2
- Dual RJ45 Ethernet, one on front panel, second inside chassis
- Single USB for UART and JTAG, dual connectors, one on front panel, second inside chassis
- Programmable logic
- Up to 400Gb/s available via front panel 2x QSFP-DD
- AMD Hard IP support for dual 100GbE
- Processing system
- Double-width passive heatsink for cooling
- Onboard power derived from 6-pin AUX connector
- Power dissipation is application-dependent
- 50W (typical) maximum power consumption
- Designed to operate between +5°C and +40°C chassis air inlet temperature, noncondensing (air temperature inside chassis between +5°C and +60°C)
- Form factor
- 3/4-length, standard-height PCIe dual-slot card (x16 mechanical)
- Supports standalone operation
- BittWare's WaveBox Pi chassis was specifically designed to house RFX-880 cards
- Manufactured to IPC-A-610 Class 2
- RoHS compliant
- CE, FCC, UKCA, and ICES approvals
- One-year hardware warranty
Overview
