|
|
Signal Conditioning The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.
- T3-07MQP
- Marki Microwave
-
1:
£880.59
-
1Expected 04/01/2027
-
New At Mouser
|
Mouser Part No
10-T3-07MQP
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.
|
|
1Expected 04/01/2027
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
RF Development Tools The EVAL-MT3H-0113H is a connectorized evaluation board for the MT3H-0113HSM passive MMIC Surface mount 1.5 - 13 GHz High Dynamic Range Mixer.
- EVAL-MT3H-0113H
- Marki Microwave
-
1:
£561.49
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-MT3H-0113H
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-MT3H-0113H is a connectorized evaluation board for the MT3H-0113HSM passive MMIC Surface mount 1.5 - 13 GHz High Dynamic Range Mixer.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
RF Development Tools The EVB-MDPX-0305P is a connectorized evaluation board for the MDPX-0305PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 3 GHz and high frequency 5 to 26.5 GHz signals.
- EVB-MDPX-0305P
- Marki Microwave
-
1:
£568.47
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVB-MDPX-0305P
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-MDPX-0305P is a connectorized evaluation board for the MDPX-0305PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 3 GHz and high frequency 5 to 26.5 GHz signals.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
Signal Conditioning The MFHP-00001BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00001BH features a 1.9 GHz 3 dBc cutoff frequency and 16 dB passband return loss. Available in a connectorized bullet housing.
- MFHP-00001BH
- Marki Microwave
-
1:
£356.37
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-MFHP-00001BH
New Product
|
Marki Microwave
|
Signal Conditioning The MFHP-00001BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00001BH features a 1.9 GHz 3 dBc cutoff frequency and 16 dB passband return loss. Available in a connectorized bullet housing.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Mixer The MM1-0832LSM is a GaAs MMIC double balanced mixer that is optimized for high frequency applications. MM1-0832LSM is a high frequency X band mixer that works well as both an up and down converter through Ka band.
- MM1-0832LSM-2
- Marki Microwave
-
1:
£141.56
-
Non-Stocked Lead-Time 10 Weeks
|
Mouser Part No
10-MM1-0832LSM-2
|
Marki Microwave
|
RF Mixer The MM1-0832LSM is a GaAs MMIC double balanced mixer that is optimized for high frequency applications. MM1-0832LSM is a high frequency X band mixer that works well as both an up and down converter through Ka band.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz.
- A-3567UC
- Marki Microwave
-
1:
£2,544.70
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-A-3567UC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems.
- ADA-1030
- Marki Microwave
-
1:
£1,059.30
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADA-1030
New At Mouser
|
Marki Microwave
|
Signal Conditioning The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
- ADM-8556PC
- Marki Microwave
-
1:
£1,534.28
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8556PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The ADM-8558 is a wideband distributed low noise amplifier capable of providing 16 dB gain and +23 dBm OIP3 from 0.005 to 20 GHz and a low 1.8 dB typical noise figure from 7 to 15 GHz.
- ADM-8558PC
- Marki Microwave
-
1:
£1,534.28
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8558PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning The ADM-8558 is a wideband distributed low noise amplifier capable of providing 16 dB gain and +23 dBm OIP3 from 0.005 to 20 GHz and a low 1.8 dB typical noise figure from 7 to 15 GHz.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A high-linearity low noise amplifier capable of providing 15 dB gain, 2.1 dB noise figure and +27 dBm OIP3 from 300 kHz to 10 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
- ADM-8622PC
- Marki Microwave
-
1:
£1,534.28
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8622PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A high-linearity low noise amplifier capable of providing 15 dB gain, 2.1 dB noise figure and +27 dBm OIP3 from 300 kHz to 10 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A high-linearity, low noise amplifier capable of providing 10.5 dB gain and +26 dBm OIP3 across a broad 0.2-20 GHz bandwidth.
- ADM-8624PC
- Marki Microwave
-
1:
£1,534.28
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8624PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A high-linearity, low noise amplifier capable of providing 10.5 dB gain and +26 dBm OIP3 across a broad 0.2-20 GHz bandwidth.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The ADM-8625PC is a high-linearity low noise amplifier capable of providing 18 dB gain, 1.4 dB noise figure and +29 dBm OIP3 from 750 MHz to 8 GHz.
- ADM-8625PC
- Marki Microwave
-
1:
£1,534.28
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8625PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning The ADM-8625PC is a high-linearity low noise amplifier capable of providing 18 dB gain, 1.4 dB noise figure and +29 dBm OIP3 from 750 MHz to 8 GHz.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A high-linearity, high gain, low noise distributed amplifier capable of providing +22dBm output power up to 35 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
- ADM1-8007APC
- Marki Microwave
-
1:
£1,534.28
-
Non-Stocked Lead-Time 18 Weeks
-
New Product
|
Mouser Part No
10-ADM1-8007APC
New Product
|
Marki Microwave
|
Signal Conditioning A high-linearity, high gain, low noise distributed amplifier capable of providing +22dBm output power up to 35 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A high-linearity amplifier capable of providing +18 dBm output power up to 10 GHz. The ADM1-8095PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
- ADM1-8095PC
- Marki Microwave
-
1:
£1,534.28
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM1-8095PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A high-linearity amplifier capable of providing +18 dBm output power up to 10 GHz. The ADM1-8095PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
- ADPFKFK
- Marki Microwave
-
1:
£69.71
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADPFKFK
New At Mouser
|
Marki Microwave
|
RF Adapters - In Series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Between Series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
- ADPFVFK
- Marki Microwave
-
1:
£103.17
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADPFVFK
New At Mouser
|
Marki Microwave
|
RF Adapters - Between Series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
- ADPFVFV
- Marki Microwave
-
1:
£97.60
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADPFVFV
New At Mouser
|
Marki Microwave
|
RF Adapters - In Series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Between Series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPFVMK
- Marki Microwave
-
1:
£103.17
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADPFVMK
New At Mouser
|
Marki Microwave
|
RF Adapters - Between Series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPMKFK
- Marki Microwave
-
1:
£69.71
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADPMKFK
New At Mouser
|
Marki Microwave
|
RF Adapters - In Series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPMKMK
- Marki Microwave
-
1:
£69.71
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADPMKMK
New At Mouser
|
Marki Microwave
|
RF Adapters - In Series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPMVFV is a 2.4mm Male to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
- ADPMVFV
- Marki Microwave
-
1:
£97.60
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADPMVFV
New At Mouser
|
Marki Microwave
|
RF Adapters - In Series The ADPMVFV is a 2.4mm Male to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPMVMV is a 2.4mm Male to 2.4mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
- ADPMVMV
- Marki Microwave
-
1:
£97.60
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-ADPMVMV
New At Mouser
|
Marki Microwave
|
RF Adapters - In Series The ADPMVMV is a 2.4mm Male to 2.4mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A wideband mmWave amplifier in our M-package enabling operation up to 95 GHz in a connectorized form. This amplifier provides typical +19 dBm output power, 11 dB gain making it suitable for driving mmWave mixers.
- AMM-0001M
- Marki Microwave
-
1:
£3,403.91
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-AMM-0001M
New At Mouser
|
Marki Microwave
|
Signal Conditioning A wideband mmWave amplifier in our M-package enabling operation up to 95 GHz in a connectorized form. This amplifier provides typical +19 dBm output power, 11 dB gain making it suitable for driving mmWave mixers.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm.
- AMM-6702UC5
- Marki Microwave
-
1:
£1,414.39
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-AMM-6702UC5
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A general-purpose broadband MMIC driver amplifier that provides +21 dBm output power suitable for driving a Marki H or L diode mixer at 11-38 GHz and S diode mixer from 15 32 GHz. The amplifier also has excellent return losses and gain flatness.
- AMM-7199UC
- Marki Microwave
-
1:
£1,000.13
-
Non-Stocked Lead-Time 18 Weeks
-
New At Mouser
|
Mouser Part No
10-AMM-7199UC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A general-purpose broadband MMIC driver amplifier that provides +21 dBm output power suitable for driving a Marki H or L diode mixer at 11-38 GHz and S diode mixer from 15 32 GHz. The amplifier also has excellent return losses and gain flatness.
|
|
Non-Stocked Lead-Time 18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|