|
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens
- PRT-09194
- SparkFun
-
1:
£25.15
-
2In Stock
|
Mouser Part No
474-PRT-09194
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs o
- PRT-09386
- SparkFun
-
1:
£28.49
-
1In Stock
|
Mouser Part No
474-PRT-09386
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs o
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j
- PRT-09389
- SparkFun
-
1:
£3.72
-
11In Stock
|
Mouser Part No
474-PRT-09389
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j
|
|
11In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty
- PRT-09390
- SparkFun
-
1:
£28.49
-
6In Stock
|
Mouser Part No
474-PRT-09390
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories 9V to Barrel Jack Adapter
- PRT-09518
- SparkFun
-
1:
£2.71
-
11In Stock
|
Mouser Part No
474-PRT-09518
|
SparkFun
|
SparkFun Accessories 9V to Barrel Jack Adapter
|
|
11In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Description: Ever wonder what goes on inside these things? Well this clear bread board might enlighten.Beyond the clear plastic this is really just a regular solderless breadboard. It has 2 power buses 30 columns and 10 rows - a total of 400 tie
- PRT-09567
- SparkFun
-
1:
£5.22
-
11In Stock
|
Mouser Part No
474-PRT-09567
|
SparkFun
|
SparkFun Accessories Description: Ever wonder what goes on inside these things? Well this clear bread board might enlighten.Beyond the clear plastic this is really just a regular solderless breadboard. It has 2 power buses 30 columns and 10 rows - a total of 400 tie
|
|
11In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo
- PRT-09914
- SparkFun
-
1:
£0.943
-
347In Stock
-
450Expected 30/07/2026
|
Mouser Part No
474-PRT-09914
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo
|
|
347In Stock
450Expected 30/07/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthD
- PRT-09916
- SparkFun
-
1:
£1.51
-
104In Stock
|
Mouser Part No
474-PRT-09916
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthD
|
|
104In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control
- PRT-09925
- SparkFun
-
1:
£1.47
-
39In Stock
-
60Expected 12/08/2026
|
Mouser Part No
474-PRT-09925
|
SparkFun
|
SparkFun Accessories This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control
|
|
39In Stock
60Expected 12/08/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
- PRT-10114
- SparkFun
-
1:
£1.88
-
57In Stock
|
Mouser Part No
474-PRT-10114
|
SparkFun
|
SparkFun Accessories These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
|
|
57In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10362
- SparkFun
-
1:
£0.995
-
41In Stock
|
Mouser Part No
474-PRT-10362
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
41In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
- PRT-10363
- SparkFun
-
1:
£1.14
-
58In Stock
|
Mouser Part No
474-PRT-10363
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
|
|
58In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10364
- SparkFun
-
1:
£1.17
-
106In Stock
|
Mouser Part No
474-PRT-10364
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
106In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10366
- SparkFun
-
1:
£1.20
-
121In Stock
|
Mouser Part No
474-PRT-10366
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
121In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
- PRT-10367
- SparkFun
-
1:
£1.52
-
34In Stock
|
Mouser Part No
474-PRT-10367
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
|
|
34In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
- PRT-10370
- SparkFun
-
1:
£1.82
-
67In Stock
|
Mouser Part No
474-PRT-10370
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
|
|
67In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
- PRT-10372
- SparkFun
-
1:
£1.88
-
233In Stock
|
Mouser Part No
474-PRT-10372
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
|
|
233In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument
- PRT-10373
- SparkFun
-
1:
£1.88
-
68In Stock
|
Mouser Part No
474-PRT-10373
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument
|
|
68In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
- PRT-10374
- SparkFun
-
1:
£2.07
-
59In Stock
|
Mouser Part No
474-PRT-10374
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
|
|
59In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
- PRT-10375
- SparkFun
-
1:
£2.22
-
117In Stock
-
590Expected 14/09/2026
|
Mouser Part No
474-PRT-10375
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
|
|
117In Stock
590Expected 14/09/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
- PRT-10376
- SparkFun
-
1:
£2.07
-
97In Stock
|
Mouser Part No
474-PRT-10376
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
|
|
97In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This DC power jack/connector is just like the other one that we carry except that it's terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm
- PRT-10811
- SparkFun
-
1:
£0.796
-
386In Stock
|
Mouser Part No
474-PRT-10811
|
SparkFun
|
SparkFun Accessories This DC power jack/connector is just like the other one that we carry except that it's terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm
|
|
386In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These are 155mm long jumpers terminated as male to male. Use these to jumper from any female header on any board to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
- PRT-10897
- SparkFun
-
1:
£20.65
-
7In Stock
|
Mouser Part No
474-PRT-10897
|
SparkFun
|
SparkFun Accessories These are 155mm long jumpers terminated as male to male. Use these to jumper from any female header on any board to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These are 155mm long jumpers terminated as female to female. Use these to jumper from any male header on any board to any other male header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
- PRT-10898
- SparkFun
-
1:
£20.65
-
7In Stock
|
Mouser Part No
474-PRT-10898
|
SparkFun
|
SparkFun Accessories These are 155mm long jumpers terminated as female to female. Use these to jumper from any male header on any board to any other male header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Hook-Up Wire Assort. SolidCore, 22 AWG
- PRT-11367
- SparkFun
-
1:
£19.38
-
41In Stock
|
Mouser Part No
474-PRT-11367
|
SparkFun
|
SparkFun Accessories Hook-Up Wire Assort. SolidCore, 22 AWG
|
|
41In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
