|
|
SparkFun Accessories This 3ft Category 6 (CAT 6) Ethernet cable is the solution to your internet working needs. With a speed of up to 500MHz you can connect to your LAN/WAN segments and networking gear at maximum speed. Also with its superior connector you get a cable t
- CAB-08915
- SparkFun
-
1:
£1.78
-
9In Stock
|
Mouser Part No
474-CAB-08915
|
SparkFun
|
SparkFun Accessories This 3ft Category 6 (CAT 6) Ethernet cable is the solution to your internet working needs. With a speed of up to 500MHz you can connect to your LAN/WAN segments and networking gear at maximum speed. Also with its superior connector you get a cable t
|
|
9In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is the LM317TG voltage regulator a three-terminal positive regulator with a 1.2V to 37V adjustable output voltage. This adjustable regulator provides a local regulation internal current limiting thermal shut-down control and safe area protec
- COM-00527
- SparkFun
-
1:
£1.52
-
12In Stock
|
Mouser Part No
474-COM-00527
|
SparkFun
|
SparkFun Accessories This is the LM317TG voltage regulator a three-terminal positive regulator with a 1.2V to 37V adjustable output voltage. This adjustable regulator provides a local regulation internal current limiting thermal shut-down control and safe area protec
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories 1/6th Watt +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our bags of resistors.
- COM-08377
- SparkFun
-
1:
£0.233
-
24In Stock
|
Mouser Part No
474-COM-08377
|
SparkFun
|
SparkFun Accessories 1/6th Watt +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our bags of resistors.
|
|
24In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:620-625nm Red1.8-2.2VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](htt
- COM-10632
- SparkFun
-
1:
£0.624
-
67In Stock
|
Mouser Part No
474-COM-10632
|
SparkFun
|
SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:620-625nm Red1.8-2.2VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](htt
|
|
67In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is the BC337 an NPN silicon BJT (Bipolar Junction Transistor). This little transistor can help in your project by being used to help drive large loads or amplifying or switching applications. The BC337 is specifically rated at 50V and 800mA max
- COM-13689
- SparkFun
-
1:
£0.413
-
50In Stock
|
Mouser Part No
474-COM-13689
|
SparkFun
|
SparkFun Accessories This is the BC337 an NPN silicon BJT (Bipolar Junction Transistor). This little transistor can help in your project by being used to help drive large loads or amplifying or switching applications. The BC337 is specifically rated at 50V and 800mA max
|
|
50In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a through-hole 12mm coin cell battery holder. It's the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. Metal housing is + PCB pad underneath is -.This battery holder is sold in single un
- PRT-07948
- SparkFun
-
1:
£0.791
-
26In Stock
|
Mouser Part No
474-PRT-07948
|
SparkFun
|
SparkFun Accessories This is a through-hole 12mm coin cell battery holder. It's the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. Metal housing is + PCB pad underneath is -.This battery holder is sold in single un
|
|
26In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Audio Jack 3.5mm
- PRT-08032
- SparkFun
-
1:
£1.32
-
134In Stock
|
Mouser Part No
474-PRT-08032
|
SparkFun
|
SparkFun Accessories Audio Jack 3.5mm
|
|
134In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories JST Right-Angle Connector TH 2-Pin
- PRT-09749
- SparkFun
-
1:
£0.826
-
132In Stock
|
Mouser Part No
474-PRT-09749
|
SparkFun
|
SparkFun Accessories JST Right-Angle Connector TH 2-Pin
|
|
132In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table.Sold in packs of 10. Check below for matching screws.
- PRT-10462
- SparkFun
-
1:
£3.38
-
4In Stock
|
Mouser Part No
474-PRT-10462
|
SparkFun
|
SparkFun Accessories These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table.Sold in packs of 10. Check below for matching screws.
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first which is fair since that is what they have been primarily used for. However with this battery holder you will gai
- PRT-12900
- SparkFun
-
1:
£1.47
-
27In Stock
|
Mouser Part No
474-PRT-12900
|
SparkFun
|
SparkFun Accessories This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first which is fair since that is what they have been primarily used for. However with this battery holder you will gai
|
|
27In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Resistor 10K Ohm 1/4 Watt PTH - 20 pk
- PRT-14491
- SparkFun
-
1:
£1.13
-
201In Stock
|
Mouser Part No
474-PRT-14491
|
SparkFun
|
SparkFun Accessories Resistor 10K Ohm 1/4 Watt PTH - 20 pk
|
|
201In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Resistor 1M Ohm 1/4 Watt PTH - 20 pk
- PRT-14494
- SparkFun
-
1:
£0.713
-
24In Stock
|
Mouser Part No
474-PRT-14494
|
SparkFun
|
SparkFun Accessories Resistor 1M Ohm 1/4 Watt PTH - 20 pk
|
|
24In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as
- SEN-08679
- SparkFun
-
1:
£12.62
-
10In Stock
|
Mouser Part No
474-SEN-08679
|
SparkFun
|
SparkFun Accessories These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as
|
|
10In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Tip tinner is a good thing to have in your arsenal of soldering supplies. Composed of a mild acid it helps remove baked on residue (for when you melt your desk top) and helps prevent oxidation (the nasty black stuff) that accumulates on your solderi
- TOL-13246
- SparkFun
-
1:
£9.83
-
8In Stock
|
Mouser Part No
474-TOL-13246
|
SparkFun
|
SparkFun Accessories Tip tinner is a good thing to have in your arsenal of soldering supplies. Composed of a mild acid it helps remove baked on residue (for when you melt your desk top) and helps prevent oxidation (the nasty black stuff) that accumulates on your solderi
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a USB 2.0 type B to Micro-B 5-pin black cable. You know the mini-B connector that usually comes with cell phones Cameras MP3 players etc. We specifically like these 6" long cables because using USB peripherals in projects within a small e
- CAB-13244
- SparkFun
-
1:
£2.10
-
3In Stock
|
Mouser Part No
474-CAB-13244
|
SparkFun
|
SparkFun Accessories This is a USB 2.0 type B to Micro-B 5-pin black cable. You know the mini-B connector that usually comes with cell phones Cameras MP3 players etc. We specifically like these 6" long cables because using USB peripherals in projects within a small e
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a 1A Adjustable SOT-223 voltage regulator capable of outputting 1.2V to 18V. The LM1117 uses the same pin-out and setup as the popular LM317 adjustable regulator contained in a handy surface mount package. Requires two external resistors to
- COM-00595
- SparkFun
-
1:
£1.20
-
97In Stock
|
Mouser Part No
474-COM-00595
|
SparkFun
|
SparkFun Accessories This is a 1A Adjustable SOT-223 voltage regulator capable of outputting 1.2V to 18V. The LM1117 uses the same pin-out and setup as the popular LM317 adjustable regulator contained in a handy surface mount package. Requires two external resistors to
|
|
97In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories The MCP3002 has a 10-bit analog to digital converter (ADC) with a simple to use SPI interface. Use this IC if your microcontroller does not have an ADC or have enough ADC lines. A great chip when you need to add additional ADC lines.Features:2.7V to
- COM-08636
- SparkFun
-
1:
£2.26
-
22In Stock
|
Mouser Part No
474-COM-08636
|
SparkFun
|
SparkFun Accessories The MCP3002 has a 10-bit analog to digital converter (ADC) with a simple to use SPI interface. Use this IC if your microcontroller does not have an ADC or have enough ADC lines. A great chip when you need to add additional ADC lines.Features:2.7V to
|
|
22In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple knob that connects to the extra large sized linear slide potentiometer. Each knob uses friction to secure itself to fit onto the slide pot. Once attached this small knob provides you with an easier to use potentiometer for your proj
- COM-09120
- SparkFun
-
1:
£1.42
-
3In Stock
|
Mouser Part No
474-COM-09120
|
SparkFun
|
SparkFun Accessories This is a simple knob that connects to the extra large sized linear slide potentiometer. Each knob uses friction to secure itself to fit onto the slide pot. Once attached this small knob provides you with an easier to use potentiometer for your proj
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate and two threaded nuts for mounting. Works great with our missile switch cover.
- COM-09276
- SparkFun
-
1:
£1.69
-
2In Stock
|
Mouser Part No
474-COM-09276
|
SparkFun
|
SparkFun Accessories This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate and two threaded nuts for mounting. Works great with our missile switch cover.
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories It's the end of the world and you need to press a button. This is it. This gigantic 100mm yellow dome button is the perfect dramatic centerpiece for interactive exhibits escape rooms or custom arcade builds. It features a built-in LED indicator to
- COM-11273
- SparkFun
-
1:
£14.91
-
1In Stock
|
Mouser Part No
474-COM-11273
|
SparkFun
|
SparkFun Accessories It's the end of the world and you need to press a button. This is it. This gigantic 100mm yellow dome button is the perfect dramatic centerpiece for interactive exhibits escape rooms or custom arcade builds. It features a built-in LED indicator to
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories 1.0M Ohm 1/4th Watt +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards. We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker than our last ones).Note: Sold as singles. But check below fo
- COM-11853
- SparkFun
-
1:
£0.079
-
128In Stock
|
Mouser Part No
474-COM-11853
|
SparkFun
|
SparkFun Accessories 1.0M Ohm 1/4th Watt +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards. We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker than our last ones).Note: Sold as singles. But check below fo
|
|
128In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Polarized Connectors Header (4-Pin)
- PRT-08231
- SparkFun
-
1:
£0.375
-
199In Stock
|
Mouser Part No
474-PRT-08231
|
SparkFun
|
SparkFun Accessories Polarized Connectors Header (4-Pin)
|
|
199In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories USB Type 'A' Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable. Designed to mount to the UBW32.Documents:Datasheet
- PRT-09011
- SparkFun
-
1:
£1.33
-
24In Stock
|
Mouser Part No
474-PRT-09011
|
SparkFun
|
SparkFun Accessories USB Type 'A' Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable. Designed to mount to the UBW32.Documents:Datasheet
|
|
24In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Audio Jack Breakout Jack Breakout
- PRT-10588
- SparkFun
-
1:
£1.13
-
38In Stock
|
Mouser Part No
474-PRT-10588
|
SparkFun
|
SparkFun Accessories Audio Jack Breakout Jack Breakout
|
|
38In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is the SMD version of PRT-07948 which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is con
- PRT-10592
- SparkFun
-
1:
£0.615
-
14In Stock
|
Mouser Part No
474-PRT-10592
|
SparkFun
|
SparkFun Accessories This is the SMD version of PRT-07948 which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is con
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|