|
|
Signal Conditioning The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
- T3-12LQP
- Marki Microwave
-
1:
£1,069.74
-
3Expected 11/09/2026
-
New At Mouser
|
Mouser Part No
10-T3-12LQP
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
|
|
3Expected 11/09/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
10 MHz to 12 GHz, 1 MHz to 4 GHz
|
|
50 Ohms
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
- T3-20GLS
- Marki Microwave
-
1:
£1,354.18
-
1Expected 21/08/2026
-
New At Mouser
|
Mouser Part No
10-T3-20GLS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
|
|
1Expected 21/08/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
10 MHz to 20 GHz
|
10 MHz to 20 GHz
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz.
- ADM-8344PC
- Marki Microwave
-
1:
£1,468.98
-
1Expected 01/01/2027
-
New At Mouser
|
Mouser Part No
10-ADM-8344PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz.
|
|
1Expected 01/01/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning A high-linearity amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM1-8096PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
- ADM1-8096PC
- Marki Microwave
-
1:
£1,468.98
-
1Expected 11/12/2026
-
New At Mouser
|
Mouser Part No
10-ADM1-8096PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A high-linearity amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM1-8096PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
|
|
1Expected 11/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
- BAL-0003
- Marki Microwave
-
1:
£550.87
-
3Expected 30/10/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0003
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
|
|
3Expected 30/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Baluns
|
200 kHz to 3 GHz
|
200 kHz to 3 GHz
|
|
50 Ohms
|
Connector
|
|
|
|
|
|
|
Signal Conditioning The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
- BAL-0026
- Marki Microwave
-
1:
£1,813.13
-
5On Order
-
New At Mouser
|
Mouser Part No
10-BAL-0026
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
|
|
5On Order
On Order:
1 Expected 09/10/2026
4 Expected 11/12/2026
Factory Lead Time:
18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Baluns
|
300 kHz to 26.5 GHz
|
300 kHz to 26.5 GHz
|
|
50 Ohms
|
Connector
|
|
|
|
|
|
|
Signal Conditioning The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
- BAL-0036
- Marki Microwave
-
1:
£2,663.04
-
1Expected 06/11/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0036
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
|
|
1Expected 06/11/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Baluns
|
300 kHz to 36 GHz
|
300 kHz to 36 GHz
|
|
|
|
|
|
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
- BALH-0006SMG
- Marki Microwave
-
1:
£202.27
-
10Expected 13/11/2026
-
New At Mouser
|
Mouser Part No
10-BALH-0006SMG
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
|
|
10Expected 13/11/2026
|
|
|
£202.27
|
|
|
£155.60
|
|
|
£131.35
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Baluns
|
500 kHz to 6 GHz
|
500 kHz to 6 GHz
|
|
|
SMD/SMT
|
|
- 55
|
+ 100 C
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
- BALH-0009SMG
- Marki Microwave
-
1:
£257.74
-
46On Order
-
New At Mouser
|
Mouser Part No
10-BALH-0009SMG
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
|
|
46On Order
On Order:
6 Expected 17/08/2026
20 Expected 20/08/2026
20 Expected 13/11/2026
Factory Lead Time:
15 Weeks
|
|
|
£257.74
|
|
|
£198.26
|
|
|
£167.36
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Baluns
|
500 kHz to 9 GHz
|
500 kHz to 9 GHz
|
|
|
SMD/SMT
|
|
|
|
|
|
|
Signal Conditioning The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
- BT-0018
- Marki Microwave
-
1:
£476.20
-
8Expected 11/12/2026
-
New At Mouser
|
Mouser Part No
10-BT-0018
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
|
|
8Expected 11/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Bias Tees
|
|
|
|
50 Ohms
|
Connector
|
|
|
|
|
|
|
Signal Conditioning The BT-0026SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 26 GHz bandwidth.
- BT-0026SMG-2
- Marki Microwave
-
1:
£163.36
-
10Expected 25/12/2026
-
New At Mouser
|
Mouser Part No
10-BT-0026SMG-2
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BT-0026SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 26 GHz bandwidth.
|
|
10Expected 25/12/2026
|
|
|
£163.36
|
|
|
£125.66
|
|
|
£106.08
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The BT-0035SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 35 GHz bandwidth.
- BT-0035SMG-1
- Marki Microwave
-
1:
£164.00
-
20Expected 01/01/2027
-
New At Mouser
|
Mouser Part No
10-BT-0035SMG-1
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BT-0035SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 35 GHz bandwidth.
|
|
20Expected 01/01/2027
|
|
|
£164.00
|
|
|
£126.16
|
|
|
£106.49
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
10 MHz to 20 GHz
|
10 MHz to 20 GHz
|
30 V
|
|
SMD/SMT
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 12 GHz bandwidth.
- BTL-0012SMG-1
- Marki Microwave
-
1:
£155.59
-
69Expected 08/01/2027
-
New At Mouser
|
Mouser Part No
10-BTL-0012SMG-1
New At Mouser
|
Marki Microwave
|
Signal Conditioning A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 12 GHz bandwidth.
|
|
69Expected 08/01/2027
|
|
|
£155.59
|
|
|
£119.67
|
|
|
£101.02
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
500 kHz to 12 GHz
|
500 kHz to 12 GHz
|
30 V
|
50 Ohms
|
SMD/SMT
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 26 GHz bandwidth.
- BTL-0026SMG-1
- Marki Microwave
-
1:
£163.36
-
Non-Stocked Lead-Time 14 Weeks
-
New At Mouser
|
Mouser Part No
10-BTL-0026SMG-1
New At Mouser
|
Marki Microwave
|
Signal Conditioning A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 26 GHz bandwidth.
|
|
Non-Stocked Lead-Time 14 Weeks
|
|
|
£163.36
|
|
|
£125.66
|
|
|
£106.08
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
500 kHz to 26 GHz
|
500 kHz to 26 GHz
|
30 V
|
|
SMD/SMT
|
|
|
+ 100 C
|
|
|
|
Signal Conditioning This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
- CA-50
- Marki Microwave
-
1:
£1,467.50
-
1Expected 23/10/2026
-
New At Mouser
|
Mouser Part No
10-CA-50
New At Mouser
|
Marki Microwave
|
Signal Conditioning This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
|
|
1Expected 23/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
- CBR16-0003
- Marki Microwave
-
1:
£787.57
-
3On Order
-
New At Mouser
|
Mouser Part No
10-CBR16-0003
New At Mouser
|
Marki Microwave
|
Signal Conditioning The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
|
|
3On Order
On Order:
1 Expected 20/08/2026
2 Expected 25/09/2026
Factory Lead Time:
13 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
200 kHz to 3 GHz
|
200 kHz to 3 GHz
|
|
|
Connector
|
|
|
|
|
|
|
Signal Conditioning A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.
- HLM-100001PSM
- Marki Microwave
-
1:
£58.19
-
173On Order
-
New At Mouser
|
Mouser Part No
10-HLM-100001PSM
New At Mouser
|
Marki Microwave
|
Signal Conditioning A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.
|
|
173On Order
On Order:
48 Expected 10/09/2026
125 Expected 18/09/2026
Factory Lead Time:
16 Weeks
|
|
|
£58.19
|
|
|
£48.49
|
|
|
£41.55
|
|
|
£37.78
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
0 Hz to 10 GHz
|
0 Hz to 10 GHz
|
|
50 Ohms
|
SMD/SMT
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.
- HLM-70CSP2
- Marki Microwave
-
1:
£103.69
-
15Expected 29/09/2026
-
New At Mouser
|
Mouser Part No
10-HLM-70CSP2
New At Mouser
|
Marki Microwave
|
Signal Conditioning The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.
|
|
15Expected 29/09/2026
|
|
|
£103.69
|
|
|
£86.42
|
|
|
£74.07
|
|
|
£67.33
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R520CSP2, offering flexibility in system design.
- MBALH-0R520CSP2
- Marki Microwave
-
1:
£163.77
-
50Expected 11/12/2026
-
New Product
|
Mouser Part No
10-MBALH-0R520CSP2
New Product
|
Marki Microwave
|
Signal Conditioning The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R520CSP2, offering flexibility in system design.
|
|
50Expected 11/12/2026
|
|
|
£163.77
|
|
|
£136.47
|
|
|
£116.98
|
|
|
£106.34
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Baluns
|
500 MHz to 20 GHz
|
500 MHz to 20 GHz
|
|
|
SMD/SMT
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning The MFB-1445SM is a passive MMIC bandpass filter. It is an integrated filter that passes Ku-Band frequencies (13.6-15.1 GHz).The MFB-1445SM is available as a 3 X 3 mm QFN package.
- MFB-1445SM
- Marki Microwave
-
1:
£86.92
-
25Expected 18/11/2026
-
New At Mouser
|
Mouser Part No
10-MFB-1445SM
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MFB-1445SM is a passive MMIC bandpass filter. It is an integrated filter that passes Ku-Band frequencies (13.6-15.1 GHz).The MFB-1445SM is available as a 3 X 3 mm QFN package.
|
|
25Expected 18/11/2026
|
|
|
£86.92
|
|
|
£71.12
|
|
|
£60.18
|
|
|
£54.72
|
|
|
£50.81
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Filters
|
13.6 GHz to 15.1 GHz
|
13.6 GHz to 15.1 GHz
|
|
|
SMD/SMT
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
- MM2-0530LS
- Marki Microwave
-
1:
£849.91
-
3Expected 31/12/2026
-
New At Mouser
|
Mouser Part No
10-MM2-0530LS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
|
|
3Expected 31/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
- MMIQ-0205HXA
- Marki Microwave
-
1:
£1,184.21
-
1Expected 21/08/2026
-
New At Mouser
|
Mouser Part No
10-MMIQ-0205HXA
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
|
|
1Expected 21/08/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
- MMIQ-0416HS
- Marki Microwave
-
1:
£1,586.49
-
1Expected 23/10/2026
-
New At Mouser
|
Mouser Part No
10-MMIQ-0416HS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
|
|
1Expected 23/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The MPD4-0218CSP3 is a small footprint MMIC 2-18 GHz 4-Way power divider/power splitter featuring high 29 dB isolation and low 0.8 dB excess insertion loss in our compact CSP3 chip scale package.
- MPD4-0218CSP3
- Marki Microwave
-
1:
£90.99
-
117On Order
-
New Product
|
Mouser Part No
10-MPD4-0218CSP3
New Product
|
Marki Microwave
|
Signal Conditioning The MPD4-0218CSP3 is a small footprint MMIC 2-18 GHz 4-Way power divider/power splitter featuring high 29 dB isolation and low 0.8 dB excess insertion loss in our compact CSP3 chip scale package.
|
|
117On Order
On Order:
67 Expected 23/11/2026
50 Expected 01/02/2027
Factory Lead Time:
15 Weeks
|
|
|
£90.99
|
|
|
£79.62
|
|
|
£72.04
|
|
|
£71.04
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The PBR-0006SMG is a 10 MHz to 6 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 35 dB typical isolation across the operational bandwidth.
- PBR-0006SMG
- Marki Microwave
-
1:
£206.74
-
10Expected 03/12/2026
-
New At Mouser
|
Mouser Part No
10-PBR-0006SMG
New At Mouser
|
Marki Microwave
|
Signal Conditioning The PBR-0006SMG is a 10 MHz to 6 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 35 dB typical isolation across the operational bandwidth.
|
|
10Expected 03/12/2026
|
|
|
£206.74
|
|
|
£159.03
|
|
|
£134.24
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Power Combiners
|
10 MHz to 6 GHz
|
10 MHz to 6 GHz
|
|
|
SMD/SMT
|
|
|
|
|
United Kingdom